Projects / Ideas / Directly driven four-digit clock

Directly driven four-digit clock

IntermediateDisplaysIdeaReviewed
In short

How do you build a directly driven four-digit clock?

Drive a bare four-digit seven-segment display by multiplexing it yourself, to learn how scanning works. You need Arduino Uno R3, 7-segment display 4 digit (common cathode), Resistor 330 Ω × 8, NPN Transistor 2N2222 × 4, Resistor 1 kΩ × 4, DS3231 RTC module and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 330 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Multiplex a seven-segment display.

Parts list

How to build it

  1. Wire segments through resistors
  2. Wire a transistor per digit
  3. Scan the digits quickly
  4. Show the time
  5. Blink the colon

Related projects

Common questions

What parts do I need for the directly driven four-digit clock?

Arduino Uno R3, 7-segment display 4 digit (common cathode), Resistor 330 Ω × 8, NPN Transistor 2N2222 × 4, Resistor 1 kΩ × 4, DS3231 RTC module and Breadboard 830 Tie Points.

How long does the directly driven four-digit clock take to build?

About 330 minutes for a intermediate maker.