Projects / Ideas / Beam-break parts counter

Beam-break parts counter

BeginnerIndustrialIdeaReviewed
In short

How do you build a beam-break parts counter?

Parts falling through a slot trip a photo-interrupter, and a display shows the count for a small workshop job. You need Arduino Nano, Photo interrupter module (end stop), 7-segment display 4 digit (common cathode), Tactile push button 6 mm and Breadboard 830 Tie Points.

Level
Beginner
Time
About 150 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Count items with a beam-break sensor.

How to build it

  1. Mount the sensor over a chute
  2. Count each break
  3. Filter double counts
  4. Show the count
  5. Add a reset

Related projects

Common questions

What parts do I need for the beam-break parts counter?

Arduino Nano, Photo interrupter module (end stop), 7-segment display 4 digit (common cathode), Tactile push button 6 mm and Breadboard 830 Tie Points.

How long does the beam-break parts counter take to build?

About 150 minutes for a beginner maker.