8-digit 7-segment module (MAX7219)
Eight digits with a MAX7219 driver, needs only three wires.
TypeLED 7-segment, 8 digits
Driver ICMAX7219
Interface3-wire serial
Supply voltage5 V
DisplaysReviewedMPN MAX7219 8 digitUsed in 7 projects
In short
What is the 8-digit 7-segment module (MAX7219) and what is it used for?
Eight digits with a MAX7219 driver, needs only three wires. Makers use it for counters and meters.
How it works
A MAX7219 multiplexes eight 7-segment digits with brightness control.
Key specifications
| Display spec | Value |
|---|---|
| Type | LED 7-segment, 8 digits |
| Driver IC | MAX7219 |
| Interface | 3-wire serial |
| Supply voltage | 5 V |
Pinout
VCC5 V
GNDGround
DINData
CSLoad
CLKClock
How to use it
Use the LedControl library: lc.setDigit or lc.setChar for each digit. Modules can be chained.
Applications
Counters and meters
Builds that use it
Alternatives
- TM1637 4-digit displayFour digits on two wires
- TM1638 LED and key moduleAdds buttons and LEDs
Common questions
What is the 8-digit 7-segment module (MAX7219) used for?
In maker projects: counters and meters.
How does the 8-digit 7-segment module (MAX7219) work?
A MAX7219 multiplexes eight 7-segment digits with brightness control.
What voltage does the 8-digit 7-segment module (MAX7219) need?
5 V.
How do I connect the 8-digit 7-segment module (MAX7219) to an Arduino or ESP32?
3-wire serial. Pins: VCC (5 V), GND (Ground), DIN (Data), CS (Load), CLK (Clock).
What can I use instead of the 8-digit 7-segment module (MAX7219)?
TM1637 4-digit display and TM1638 LED and key module.
