Idea
In short
How do you build a bedside clock with a dimmer?
An HT16K33 seven-segment clock shows the time in big digits and dims itself at night using a light sensor. You need Arduino Nano, HT16K33 LED matrix driver, 7-segment display 4 digit (common cathode), DS3231 RTC module, LDR Photoresistor and Resistor 10 kΩ.
- Level
- Intermediate
- Time
- About 120 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Drive an I2C LED display and adapt brightness.
Parts list
- Development Boards
- Integrated Circuits
- Displays
- Sensors
- Sensors
- Passives
How to build it
- Wire the HT16K33 driver
- Show the time from the RTC
- Blink the colon each second
- Read the light
- Set the display brightness from light
Related projects
Common questions
What parts do I need for the bedside clock with a dimmer?
Arduino Nano, HT16K33 LED matrix driver, 7-segment display 4 digit (common cathode), DS3231 RTC module, LDR Photoresistor and Resistor 10 kΩ.
How long does the bedside clock with a dimmer take to build?
About 120 minutes for a intermediate maker.
