Top 10 Raspberry Pi Pico projects with MicroPython
The 10 best Raspberry Pi Pico and Pico W projects: MicroPython first steps, sensors, a Wi-Fi clock, soil moisture web page, tape measure, LED sign and snake game, with code.
What are the best Raspberry Pi Pico projects?
A Raspberry Pi Pico is a small, cheap microcontroller board that you program in MicroPython. Start with the first-steps blink and button project, then read sensors, then use a Pico W for a Wi-Fi clock or a soil moisture web page. The ten builds below take about 40 minutes to under 3 hours each.
- Projects
- 10 guided builds
- Levels
- Beginner, Intermediate
- Build time
- 40 min to 2.7 h
The 10 projects
Only guided builds that use a Pico or Pico W are listed, ordered from the first blink to Wi-Fi pages, displays and a logic analyser.
Raspberry Pi Pico first steps in MicroPython
Flash MicroPython onto a Raspberry Pi Pico, blink an external LED with a timer, and toggle it with a button using an interrupt.
MicroPython on Pico with sensors
Use MicroPython on a Pico to read a temperature sensor, a button and an LED from the REPL.
Pico W plant moisture web page
A Pico W reads a capacitive soil moisture module and serves a dry, moist or wet message on a page on your home Wi-Fi.
Pico W Wi-Fi clock
A Pico W sets its clock over Wi-Fi from a network time server and shows hours and minutes on a TM1637 display with a blinking colon.
Pico joystick snake game
A Pico reads a two-axis joystick and plays the snake game on an OLED, with a growing tail, a score and a game over screen.
Pico temperature logger with a probe
A Pico reads a DS18B20 probe with MicroPython and shows the value and the lowest and highest readings on an OLED.
Pico distance tape measure
A Pico measures distance with an HC-SR04 and shows centimetres on an OLED, with a hold button to freeze the reading.
Pico LED matrix scrolling sign
A Pico drives a MAX7219 8x8 LED matrix over SPI and scrolls a short message, with a button to change the message.
Pico dusk night light
A Pico switches an LED on at dusk using a photoresistor and fades it up and down with PWM, with no knob needed.
Logic analyser from a Pico
A Pico runs logic analyser firmware and captures 8 or more channels for viewing in PulseView.
Before you start
Every build has the full parts list, wiring table, tested code and troubleshooting. Check the circuit or sketch first in the code space or the circuit builder, then order parts with the Buy at Geekobot links on each project page. ElectroLark does not sell parts.
New to the basics? Take the free microcontrollers course, or browse all projects and final-year project briefs.
Raspberry Pi Pico projects: common questions
What is the difference between Raspberry Pi and Raspberry Pi Pico?
The Pico is a microcontroller board like an Arduino: no operating system, instant start, programs in MicroPython or C. A Raspberry Pi is a small computer that runs Linux.
Should I learn MicroPython or C on the Pico?
Start with MicroPython: you can type commands on the board and see results at once. Most guides here use it, and the Pico also runs C and C++ later.
What does the Pico W add?
Built-in Wi-Fi, so it can serve web pages, fetch the time and send data. Two builds here use the W.
Is the Pico good for beginners?
Yes. It is inexpensive, hard to damage and has plenty of pins. The first two projects here assume no experience.
Pico or ESP32?
Choose the Pico for learning microcontrollers with clean MicroPython. Choose an ESP32 when Bluetooth, many libraries or a larger ecosystem for IoT matter.
