Projects / Ideas / Make an XT30 power lead

Make an XT30 power lead

BeginnerHome LabIdeaReviewed
In short

How do you build a make an XT30 power lead?

Cut, strip, solder and cover a power lead with a keyed connector, and test it with a meter for polarity and voltage drop. You need XT30 connector pair, Hook-up wire 22 AWG solid (6 colours), Lead-free solder wire (SAC305) and Digital multimeter.

Level
Beginner
Time
About 90 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Make a good power lead.

Parts list

How to build it

  1. Cut and strip the wire
  2. Tin the cups
  3. Solder with correct polarity
  4. Cover the joints
  5. Check polarity and resistance

Related projects

Common questions

What parts do I need for the make an XT30 power lead?

XT30 connector pair, Hook-up wire 22 AWG solid (6 colours), Lead-free solder wire (SAC305) and Digital multimeter.

How long does the make an XT30 power lead take to build?

About 90 minutes for a beginner maker.