Projects / Ideas / Two-node XBee chat

Two-node XBee chat

AdvancedCommunicationIdeaReviewed
In short

How do you build a two-node XBee chat?

Two small mesh radios pass short messages between two boards, a gentle introduction to networked radios. You need Arduino Nano × 2, XBee 3 module × 2, SSD1306 OLED Display and Breadboard 830 Tie Points × 2.

Level
Advanced
Time
About 330 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Chat over XBee radios.

Parts list

How to build it

  1. Configure both radios
  2. Wire to the boards
  3. Send a message
  4. Show received text
  5. Add an acknowledgement

Related projects

Common questions

What parts do I need for the two-node XBee chat?

Arduino Nano × 2, XBee 3 module × 2, SSD1306 OLED Display and Breadboard 830 Tie Points × 2.

How long does the two-node XBee chat take to build?

About 330 minutes for a advanced maker.