XBee 3 module
Zigbee, 802.15.4 and BLE module with a standard socket.
RadioZigbee 3.0, 802.15.4, BLE
Band2.4 GHz
InterfaceUART
Supply voltage2.1 to 3.6 V
WirelessReviewedMPN XB3-24Z8PTUsed in 2 projects
In short
What is the XBee 3 module and what is it used for?
Zigbee, 802.15.4 and BLE module with a standard socket. Makers use it for mesh sensor networks.
How it works
A Digi module with a Zigbee 3.0, 802.15.4 and Bluetooth LE radio.
Key specifications
| Wireless module spec | Value |
|---|---|
| Radio | Zigbee 3.0, 802.15.4, BLE |
| Band | 2.4 GHz |
| Interface | UART |
| Supply voltage | 2.1 to 3.6 V |
Pinout
1VCC (2.1 to 3.6 V)
2DOUT (serial out)
3DIN (serial in)
10GND
9Sleep request
Pitch2 mm, use an adapter
How to use it
Configure with Digi XCTU. In transparent mode two XBees act as a wireless serial cable. It can also run MicroPython on the module.
Applications
Mesh sensor networks
Builds that use it
Alternatives
- NRF52840 dongleCheaper Thread and Zigbee radio
- E32 LoRa UART module (868 MHz)Longer range serial link
Common questions
What is the XBee 3 module used for?
In maker projects: mesh sensor networks.
How does the XBee 3 module work?
A Digi module with a Zigbee 3.0, 802.15.4 and Bluetooth LE radio.
What voltage does the XBee 3 module need?
2.1 to 3.6 V.
How do I connect the XBee 3 module to an Arduino or ESP32?
UART. Pins: 1 (VCC (2.1 to 3.6 V)), 2 (DOUT (serial out)), 3 (DIN (serial in)), 10 (GND), 9 (Sleep request), Pitch (2 mm, use an adapter).
What can I use instead of the XBee 3 module?
NRF52840 dongle and E32 LoRa UART module (868 MHz).
