Idea
In short
How do you build a rainbow bike wheel lights?
A LED strip in a bicycle wheel makes patterns that follow the wheel's speed, using a Hall sensor. You need Arduino Nano, WS2812B addressable RGB LED strip (1 m, 60 LEDs), Hall Effect Sensor A3144, Neodymium magnets (10 × 3 mm), 18650 cell 2600 mAh (branded), Battery holder 18650 single and MT3608 Boost Module.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Time patterns to the rotation of a wheel.
Parts list
- Development Boards
- Optoelectronics
- Sensors
- Mechanical & Hardware
- Batteries
- Power
- Power
How to build it
- Fix the strip to the spokes
- Detect each turn with the Hall sensor
- Set the pattern relative to the turn
- Update the LEDs fast
- Check balance and secure everything
Common questions
What parts do I need for the rainbow bike wheel lights?
Arduino Nano, WS2812B addressable RGB LED strip (1 m, 60 LEDs), Hall Effect Sensor A3144, Neodymium magnets (10 × 3 mm), 18650 cell 2600 mAh (branded), Battery holder 18650 single and MT3608 Boost Module.
How long does the rainbow bike wheel lights take to build?
About 180 minutes for a intermediate maker.
