Idea
In short
How do you build a light painting stick?
An APA102 strip shows a picture one column at a time as you sweep it through the air in front of a camera on a long exposure. You need Raspberry Pi Pico H, APA102 / SK9822 strip (clocked), SanDisk microSD card 32 GB (A1, Class 10), Tactile push button 6 mm, 18650 cell 2600 mAh (branded), Battery holder 18650 single and MT3608 Boost Module.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Display an image by timed columns.
Parts list
- Development Boards
- Optoelectronics
- SBC Accessories
- Switches
- Batteries
- Power
- Power
How to build it
- Convert a picture to columns
- Read the columns from the SD card
- Show one every few milliseconds
- Start on a button
- Tune the speed for your camera
Related projects
Common questions
What parts do I need for the light painting stick?
Raspberry Pi Pico H, APA102 / SK9822 strip (clocked), SanDisk microSD card 32 GB (A1, Class 10), Tactile push button 6 mm, 18650 cell 2600 mAh (branded), Battery holder 18650 single and MT3608 Boost Module.
How long does the light painting stick take to build?
About 150 minutes for a intermediate maker.
