Idea
In short
How do you build a garden path night light?
A small solar panel charges a battery and a motion sensor turns on path LEDs at night. You need Arduino Nano, PIR Motion Sensor HC-SR501, LDR Photoresistor, Solar panel 6 V 1 W, CN3065 solar Li-ion charger module, 18650 cell 2600 mAh (branded), Battery holder 18650 single, MOSFET IRLZ44N, Resistor 10 kΩ and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 300 min
- Parts
- 10
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Combine charging, light sensing and motion.
Parts list
- Development Boards
- Sensors
- Sensors
- Power
- Power
- Batteries
- Power
- Semiconductors
- Passives
- Prototyping
How to build it
- Charge the cell from the panel
- Sense darkness
- Detect motion
- Fade the LEDs on
- Switch off after a minute
Common questions
What parts do I need for the garden path night light?
Arduino Nano, PIR Motion Sensor HC-SR501, LDR Photoresistor, Solar panel 6 V 1 W, CN3065 solar Li-ion charger module, 18650 cell 2600 mAh (branded), Battery holder 18650 single, MOSFET IRLZ44N, Resistor 10 kΩ and Breadboard 830 Tie Points.
How long does the garden path night light take to build?
About 300 minutes for a beginner maker.
