Idea
In short
How do you build a posture reminder?
A small sensor on your upper back buzzes gently when you slouch for several minutes. You need Arduino Nano, LIS3DH accelerometer, Vibration motor (coin type), MOSFET IRLZ44N, Rectifier Diode 1N4007, Resistor 1 kΩ, Li-Po battery 3.7 V 500 mAh and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 270 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Detect a slouch angle and give feedback.
Parts list
- Development Boards
- Sensors
- Motors & Actuators
- Semiconductors
- Semiconductors
- Passives
- Batteries
- Prototyping
How to build it
- Read the tilt
- Set a good-posture reference
- Detect a slouch angle
- Wait a few minutes
- Buzz gently
Common questions
What parts do I need for the posture reminder?
Arduino Nano, LIS3DH accelerometer, Vibration motor (coin type), MOSFET IRLZ44N, Rectifier Diode 1N4007, Resistor 1 kΩ, Li-Po battery 3.7 V 500 mAh and Breadboard 830 Tie Points.
How long does the posture reminder take to build?
About 270 minutes for a intermediate maker.
