Idea
In short
How do you build a silent vibrating timer?
A tiny motor buzzes your pocket when a set time is up, useful in a quiet class or meeting. You need Arduino Nano, Vibration motor (coin type), NPN Transistor 2N2222, Resistor 1 kΩ, Rectifier Diode 1N4007, Tactile push button 6 mm × 2, TM1637 4-digit display, 9 V battery, 9 V battery snap with DC jack and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 210 min
- Parts
- 10
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Notify silently with vibration.
Parts list
- Development Boards
- Motors & Actuators
- Semiconductors
- Passives
- Semiconductors
- Switches
- Displays
- Batteries
- Power
- Prototyping
How to build it
- Wire the transistor driver
- Add the flyback diode
- Set a time with buttons
- Count down on the display
- Buzz in short pulses
Related projects
Common questions
What parts do I need for the silent vibrating timer?
Arduino Nano, Vibration motor (coin type), NPN Transistor 2N2222, Resistor 1 kΩ, Rectifier Diode 1N4007, Tactile push button 6 mm × 2, TM1637 4-digit display, 9 V battery, 9 V battery snap with DC jack and Breadboard 830 Tie Points.
How long does the silent vibrating timer take to build?
About 210 minutes for a beginner maker.
