Projects / Ideas / Washing cycle finished alert

Washing cycle finished alert

IntermediateSmart HomeIdeaReviewed
In short

How do you build a washing cycle finished alert?

A vibration sensor on a washing machine notices when it stops and sends you a message that the cycle is done. You need ESP32-C3 SuperMini, ADXL345 accelerometer, Li-Po battery 3.7 V 500 mAh, TP4056 module with protection (USB-C) and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Detect the end of an activity from vibration.

How to build it

  1. Attach the sensor with tape
  2. Measure vibration level
  3. Detect minutes of calm
  4. Send a message
  5. Tune the thresholds over several loads

Related projects

Common questions

What parts do I need for the washing cycle finished alert?

ESP32-C3 SuperMini, ADXL345 accelerometer, Li-Po battery 3.7 V 500 mAh, TP4056 module with protection (USB-C) and Breadboard 830 Tie Points.

How long does the washing cycle finished alert take to build?

About 210 minutes for a intermediate maker.