Idea
In short
How do you build a letterbox notification?
A reed switch on a letterbox flap sends a message to your phone when mail arrives. You need ESP32-C3 SuperMini, Door reed switch MC-38, Li-Po battery 3.7 V 500 mAh, TP4056 module with protection (USB-C) and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 180 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Send a notification from a sensor.
Parts list
- Development Boards
- Sensors
- Batteries
- Power
- Prototyping
How to build it
- Wake from deep sleep on the reed switch
- Connect to Wi-Fi
- Send a notification
- Go back to sleep
- Estimate battery life
Common questions
What parts do I need for the letterbox notification?
ESP32-C3 SuperMini, Door reed switch MC-38, Li-Po battery 3.7 V 500 mAh, TP4056 module with protection (USB-C) and Breadboard 830 Tie Points.
How long does the letterbox notification take to build?
About 180 minutes for a beginner maker.
