Idea
In short
How do you build a relay voltage stabiliser study?
Learn how a home stabiliser switches transformer taps with relays by building a low-voltage model that steps a 12 V AC source. You need Arduino Nano, ZMPT101B AC voltage sensor module, Relay module 2-channel 5 V, 16x2 LCD with I2C backpack (PCF8574) and ABS project box (100 × 60 × 25 mm).
- Level
- Advanced
- Time
- About 300 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Model tap switching with relays and hysteresis safely at low voltage.
Parts list
- Development Boards
- Sensors
- Interfaces
- Displays
- Mechanical & Hardware
How to build it
- Use a low-voltage AC transformer as the 'mains' source
- Measure the input RMS
- Switch relays to choose boost, normal or buck taps on a model transformer
- Add hysteresis and a delay between switches
- Never build a mains stabiliser yourself
Common questions
What parts do I need for the relay voltage stabiliser study?
Arduino Nano, ZMPT101B AC voltage sensor module, Relay module 2-channel 5 V, 16x2 LCD with I2C backpack (PCF8574) and ABS project box (100 × 60 × 25 mm).
How long does the relay voltage stabiliser study take to build?
About 300 minutes for a advanced maker.
