Projects / Ideas / Varistor clamp curve demo

Varistor clamp curve demo

IntermediateSafetyIdeaReviewed
In short

How do you build a varistor clamp curve demo?

Learn how a varistor's resistance falls above its rating by testing a low-voltage cousin on a bench supply. Never test mains-rated parts yourself. You need Adjustable bench power supply module (DPS5005), Resistor 1 kΩ, Resistor 10 kΩ, Digital multimeter and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 150 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Understand surge protection.

How to build it

  1. Read the datasheet
  2. Test a low-voltage part below its rating
  3. Record current at several voltages
  4. Plot the curve
  5. Compare with a resistor

Related projects

Common questions

What parts do I need for the varistor clamp curve demo?

Adjustable bench power supply module (DPS5005), Resistor 1 kΩ, Resistor 10 kΩ, Digital multimeter and Breadboard 830 Tie Points.

How long does the varistor clamp curve demo take to build?

About 150 minutes for a intermediate maker.