Projects / Ideas / UV-C style steriliser box with interlock

UV-C style steriliser box with interlock

IntermediateHealthIdeaReviewed
In short

How do you build an UV-C style steriliser box with interlock?

A box with UV LEDs and a door switch cleans phones and keys, and the light cannot turn on with the door open. You need Arduino Nano, UV LED 365 nm (3 W) × 2, MOSFET IRLZ44N, Limit switch (micro switch with lever), TM1637 4-digit display, 12 V 2 A DC adapter and Active buzzer 5 V.

Level
Intermediate
Time
About 150 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Use an interlock for a hazardous light source.

Parts list

How to build it

  1. Wire the door switch in series with the LED supply
  2. Run a timed cycle
  3. Stop at once if the door opens
  4. Beep when done
  5. Note that 365 nm is UV-A and only some germs are affected

Related projects

Common questions

What parts do I need for the UV-C style steriliser box with interlock?

Arduino Nano, UV LED 365 nm (3 W) × 2, MOSFET IRLZ44N, Limit switch (micro switch with lever), TM1637 4-digit display, 12 V 2 A DC adapter and Active buzzer 5 V.

How long does the UV-C style steriliser box with interlock take to build?

About 150 minutes for a intermediate maker.