Idea
In short
How do you build a honey extractor speed controller?
A soft-start motor controller with speed set by a knob and a lid safety switch. You need Arduino Nano, DC motor speed controller (PWM, 10 A), Limit switch (micro switch with lever), Potentiometer 10 kΩ, TM1637 4-digit display and 12 V 2 A DC adapter.
- Level
- Beginner
- Time
- About 120 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Control motor speed safely.
Parts list
- Development Boards
- Motor Drivers
- Switches
- Passives
- Displays
- Power
How to build it
- Ramp speed up slowly
- Stop if the lid opens
- Show rpm
- Set a timer
- Use food-safe materials
Common questions
What parts do I need for the honey extractor speed controller?
Arduino Nano, DC motor speed controller (PWM, 10 A), Limit switch (micro switch with lever), Potentiometer 10 kΩ, TM1637 4-digit display and 12 V 2 A DC adapter.
How long does the honey extractor speed controller take to build?
About 120 minutes for a beginner maker.
