Idea
In short
How do you build an UV exposure box for PCBs?
A box of 395 nm UV LEDs with a timer exposes photo-resist boards and cures solder mask. You need Arduino Nano, UV LED 395 nm (5 mm) × 24, Resistor 100 Ω × 8, MOSFET IRLZ44N, TM1637 4-digit display, Tactile push button 6 mm × 2, Active buzzer 5 V, 12 V 2 A DC adapter and ABS project box (100 × 60 × 25 mm).
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 9
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build an even light source and a precise timer.
Parts list
- Development Boards
- OptoelectronicsUV LED 395 nm (5 mm) × 24
- PassivesResistor 100 Ω × 8One per string of three LEDs
- Semiconductors
- Displays
- Switches
- Motors & Actuators
- Power
- Mechanical & Hardware
How to build it
- Arrange LEDs in a grid for even light
- Drive strings from 12 V through resistors
- Set exposure time with buttons
- Beep when done
- Never look at UV LEDs and fit a lid switch
Common questions
What parts do I need for the UV exposure box for PCBs?
Arduino Nano, UV LED 395 nm (5 mm) × 24, Resistor 100 Ω × 8, MOSFET IRLZ44N, TM1637 4-digit display, Tactile push button 6 mm × 2, Active buzzer 5 V, 12 V 2 A DC adapter and ABS project box (100 × 60 × 25 mm). Resistor 100 Ω × 8: One per string of three LEDs.
How long does the UV exposure box for PCBs take to build?
About 180 minutes for a intermediate maker.
