Idea
In short
How do you build an UV index clip for a bag?
A UV sensor on a bag strap shows the current UV level and warns when it passes a limit. It is a guide only and does not replace weather forecasts. You need Arduino Nano, GUVA-S12SD UV sensor module, SSD1306 OLED Display, Passive buzzer, Li-Po battery 3.7 V 500 mAh and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Read UV light and map to an index.
Parts list
- Development Boards
- Sensors
- Displays
- Motors & Actuators
- Batteries
- Prototyping
How to build it
- Read the analog voltage
- Convert to a UV index
- Show it
- Warn at a set limit
- Check against a forecast
Related projects
Common questions
What parts do I need for the UV index clip for a bag?
Arduino Nano, GUVA-S12SD UV sensor module, SSD1306 OLED Display, Passive buzzer, Li-Po battery 3.7 V 500 mAh and Breadboard 830 Tie Points.
How long does the UV index clip for a bag take to build?
About 210 minutes for a intermediate maker.
