Idea
In short
How do you build a gesture-controlled desk lamp?
Swipe your hand over an APDS-9960 to turn a lamp on and off, or move up and down to change brightness. You need Arduino Nano, APDS-9960 gesture, colour and proximity sensor, 10 W COB LED (12 V), MOSFET IRLZ44N, Heatsink TO-220 and 12 V 2 A DC adapter.
- Level
- Intermediate
- Time
- About 120 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Read gestures from a proximity and gesture sensor.
Parts list
- Development Boards
- Sensors
- Optoelectronics
- Semiconductors
- Tools & Instruments
- Power
How to build it
- Read gesture events over I2C
- Map left and right to on and off
- Map up and down to brightness
- Smooth the PWM changes
- Mount the sensor so it faces the user
Common questions
What parts do I need for the gesture-controlled desk lamp?
Arduino Nano, APDS-9960 gesture, colour and proximity sensor, 10 W COB LED (12 V), MOSFET IRLZ44N, Heatsink TO-220 and 12 V 2 A DC adapter.
How long does the gesture-controlled desk lamp take to build?
About 120 minutes for a intermediate maker.
