Projects / Ideas / Digital pot LED dimmer

Digital pot LED dimmer

BeginnerLightingIdeaReviewed
In short

How do you build a digital pot LED dimmer?

An X9C103 digital potentiometer, driven by two buttons, sets the brightness of a lamp through a transistor. You need Arduino Nano, X9C103 digital potentiometer, Tactile push button 6 mm × 2, MOSFET IRLZ44N, 12 V LED strip warm white (5 m, 2835) and 12 V 2 A DC adapter.

Level
Beginner
Time
About 90 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Use up-down digital potentiometer pins.

Parts list

How to build it

  1. Wire the X9C103
  2. Step the wiper up and down
  3. Drive the gate with the output
  4. Remember the setting
  5. Add a soft start

Related projects

Common questions

What parts do I need for the digital pot LED dimmer?

Arduino Nano, X9C103 digital potentiometer, Tactile push button 6 mm × 2, MOSFET IRLZ44N, 12 V LED strip warm white (5 m, 2835) and 12 V 2 A DC adapter.

How long does the digital pot LED dimmer take to build?

About 90 minutes for a beginner maker.