Projects / Ideas / Fluorescent ink checker

Fluorescent ink checker

BeginnerLearningIdeaReviewed
In short

How do you build a fluorescent ink checker?

A violet LED torch shows hidden fluorescent ink and highlights. Never shine it at eyes, and keep it away from children. You need UV LED 395 nm (5 mm), Resistor 220 Ω, Tactile push button 6 mm, 9 V battery, 9 V battery snap with DC jack and Breadboard 830 Tie Points.

Level
Beginner
Time
About 90 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Make a small UV torch.

How to build it

  1. Calculate the resistor
  2. Wire the LED and button
  3. Mark a card with ink
  4. Test the glow
  5. Add a warning label

Related projects

Common questions

What parts do I need for the fluorescent ink checker?

UV LED 395 nm (5 mm), Resistor 220 Ω, Tactile push button 6 mm, 9 V battery, 9 V battery snap with DC jack and Breadboard 830 Tie Points.

How long does the fluorescent ink checker take to build?

About 90 minutes for a beginner maker.