Idea
In short
How do you build an uno R4 NFC tag reader?
An Uno R4 WiFi reads the unique ID of NFC tags with a PN532 module and shows it on an OLED, with a small list of known tags. Only tag IDs are shown; tell people using tags and never copy a card that is not yours. You need Arduino Uno R4 WiFi, PN532 NFC module, SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Read the IDs of NFC tags.
Parts list
- Development Boards
- Wireless
- Displays
- Prototyping
How to build it
- Set the module to I2C mode
- Wire the module and display
- Read a tag ID
- Compare it with the known list
- Show the tag name or unknown
Common questions
What parts do I need for the uno R4 NFC tag reader?
Arduino Uno R4 WiFi, PN532 NFC module, SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the uno R4 NFC tag reader take to build?
About 150 minutes for a intermediate maker.
