Idea
In short
How do you build a security guard patrol checkpoints?
Guards tap an RFID card at checkpoints around a building, and a handheld logger records the time at each one to prove the patrol happened. You need Arduino Nano, RC522 RFID reader, RFID tags 13.56 MHz (MIFARE Classic 1K) × 6, DS3231 RTC module, MicroSD Card Module, SSD1306 OLED Display, Li-Po battery 3.7 V 1000 mAh, TP4056 module with protection (USB-C) and MT3608 Boost Module.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 9
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build a portable logger that reads fixed tags.
Parts list
- Development Boards
- Wireless
- Wireless
- Sensors
- Interfaces
- Displays
- Batteries
- Power
- Power
How to build it
- Stick a tag at each checkpoint and name it
- The guard taps the reader on the tag
- Log tag name and time to SD
- Show missed checkpoints at the end of the round
- Export the log as CSV
Common questions
What parts do I need for the security guard patrol checkpoints?
Arduino Nano, RC522 RFID reader, RFID tags 13.56 MHz (MIFARE Classic 1K) × 6, DS3231 RTC module, MicroSD Card Module, SSD1306 OLED Display, Li-Po battery 3.7 V 1000 mAh, TP4056 module with protection (USB-C) and MT3608 Boost Module.
How long does the security guard patrol checkpoints take to build?
About 150 minutes for a intermediate maker.
