Components / Boards / Arduino Uno R4 WiFi

Arduino Uno R4 WiFi

Uno R4 with an ESP32-S3 for Wi-Fi and Bluetooth, and a 12 × 8 LED matrix on the board.

MicrocontrollerRenesas RA4M1 48 MHz + ESP32-S3 radio
Flash256 KB
RAM32 KB
Logic level5 V
Development BoardsReviewedMPN ABX00087Used in 5 projects
UNO
In short

What is the Arduino Uno R4 WiFi and what is it used for?

Uno R4 with an ESP32-S3 for Wi-Fi and Bluetooth, and a 12 × 8 LED matrix on the board. Makers use it for ioT with the Uno layout.

How it works

An RA4M1 runs your sketch and an ESP32-S3 module handles Wi-Fi and Bluetooth, talking over serial.

Key specifications

Development board specValue
MicrocontrollerRenesas RA4M1 48 MHz + ESP32-S3 radio
Flash256 KB
RAM32 KB
Logic level5 V
Input voltage6 to 24 V
WirelessWi-Fi 2.4 GHz, Bluetooth LE

Pinout

A0DAC
A4 A5I2C
Qwiic3.3 V I2C on Wire1
1112 13SPI
D4 D5CAN TX RX
01Serial1
VIN6 to 24 V

How to use it

Same as the R4 Minima plus WiFiS3 for Wi-Fi, ArduinoBLE for Bluetooth and the Arduino_LED_Matrix library for the 12 × 8 red matrix. Use Wire1, not Wire, for the Qwiic connector.

Applications

Alternatives

Buy at

Common questions

What is the Arduino Uno R4 WiFi used for?

In maker projects: ioT with the Uno layout.

How does the Arduino Uno R4 WiFi work?

An RA4M1 runs your sketch and an ESP32-S3 module handles Wi-Fi and Bluetooth, talking over serial.

What can I use instead of the Arduino Uno R4 WiFi?

Arduino Uno R4 Minima and ESP32 DevKit V1.