Idea
In short
How do you build an obstacle-warning cane add-on?
An ultrasonic sensor on a cane buzzes faster as an obstacle gets closer. It adds to a cane and never replaces one. You need Arduino Nano, US-100 ultrasonic sensor, Vibration motor (coin type), MOSFET IRLZ44N, Rectifier Diode 1N4007, 9 V battery and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 270 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Map distance to feedback.
Parts list
- Development Boards
- Sensors
- Motors & Actuators
- Semiconductors
- Semiconductors
- Batteries
- Prototyping
How to build it
- Read the distance
- Map distance to pulse rate
- Drive a vibration motor
- Test indoors
- Discuss limits with real users
Common questions
What parts do I need for the obstacle-warning cane add-on?
Arduino Nano, US-100 ultrasonic sensor, Vibration motor (coin type), MOSFET IRLZ44N, Rectifier Diode 1N4007, 9 V battery and Breadboard 830 Tie Points.
How long does the obstacle-warning cane add-on take to build?
About 270 minutes for a intermediate maker.
