Components / Sensors / US-100 ultrasonic sensor

US-100 ultrasonic sensor

Ultrasonic sensor with temperature correction and a serial mode.

MeasuresDistance by ultrasound
Range2 cm to 4.5 m
InterfaceTrigger/echo or UART
Supply voltage2.4 to 5.5 V
SensorsReviewedMPN US-100Used in 2 projects
In short

What is the US-100 ultrasonic sensor and what is it used for?

Ultrasonic sensor with temperature correction and a serial mode. Makers use it for more accurate distance.

How it works

An ultrasonic transducer pair with a built-in temperature sensor for speed-of-sound correction.

Key specifications

Sensor specValue
MeasuresDistance by ultrasound
Range2 cm to 4.5 m
InterfaceTrigger/echo or UART
Supply voltage2.4 to 5.5 V

Pinout

VCC2.4 to 5.5 V
Trig/TXTrigger, or UART TX when jumper fitted
Echo/RXEcho, or UART RX
GNDGround
GNDSecond ground

How to use it

Without the jumper it works like an HC-SR04 at 3.3 V. With the jumper, send 0x55 over UART at 9600 baud and receive two bytes of distance in millimetres, already temperature-compensated.

Applications

Alternatives

Buy at

Common questions

What is the US-100 ultrasonic sensor used for?

In maker projects: more accurate distance.

How does the US-100 ultrasonic sensor work?

An ultrasonic transducer pair with a built-in temperature sensor for speed-of-sound correction.

What voltage does the US-100 ultrasonic sensor need?

2.4 to 5.5 V.

How do I connect the US-100 ultrasonic sensor to an Arduino or ESP32?

Trigger/echo or UART. Pins: VCC (2.4 to 5.5 V), Trig/TX (Trigger, or UART TX when jumper fitted), Echo/RX (Echo, or UART RX), GND (Ground), GND (Second ground).

What can I use instead of the US-100 ultrasonic sensor?

HC-SR04 Ultrasonic Sensor.