Idea
In short
How do you build a switch-adapted toy controller?
A single large switch operates a battery toy through a MOSFET so a child with limited movement can play. You need Arduino Nano, Tactile push button 6 mm, MOSFET IRLZ44N, Resistor 10 kΩ, Rectifier Diode 1N4007, DC motor 130 size (toy motor) and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Adapt a toy for one-switch control.
Parts list
- Development Boards
- Switches
- Semiconductors
- Passives
- Semiconductors
- Motors & Actuators
- Prototyping
How to build it
- Wire the switch input
- Add a timer for a fixed run
- Drive the toy motor
- Add a flyback diode
- Test with the user and adjust
Common questions
What parts do I need for the switch-adapted toy controller?
Arduino Nano, Tactile push button 6 mm, MOSFET IRLZ44N, Resistor 10 kΩ, Rectifier Diode 1N4007, DC motor 130 size (toy motor) and Breadboard 830 Tie Points.
How long does the switch-adapted toy controller take to build?
About 150 minutes for a intermediate maker.
