Idea
In short
How do you build a chest-worn obstacle sensor?
Three sonar sensors across a vest vibrate on the side where an obstacle is near. You need Arduino Nano, HC-SR04 Ultrasonic Sensor × 3, Vibration motor (coin type) × 3, BC547 NPN transistor × 3, Resistor 1 kΩ × 3, Signal Diode 1N4148 × 3 and Li-Po battery 3.7 V 2000 mAh.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Give directional feedback.
Parts list
- Development Boards
- Sensors
- Motors & Actuators
- Semiconductors
- PassivesResistor 1 kΩ × 3
- Semiconductors
- Batteries
How to build it
- Aim sensors left, centre and right
- Vibrate the matching side
- Scale with distance
- Reduce false alarms
- Test with users
Common questions
What parts do I need for the chest-worn obstacle sensor?
Arduino Nano, HC-SR04 Ultrasonic Sensor × 3, Vibration motor (coin type) × 3, BC547 NPN transistor × 3, Resistor 1 kΩ × 3, Signal Diode 1N4148 × 3 and Li-Po battery 3.7 V 2000 mAh.
How long does the chest-worn obstacle sensor take to build?
About 240 minutes for a intermediate maker.
