Idea
In short
How do you build a clap direction finder?
Two microphones a hand-span apart hear a clap at slightly different times, and a Nano works out whether the clap came from the left, the right or straight ahead and lights the matching LED. It measures only timing and records no sound. You need Arduino Nano, MAX4466 microphone module × 2, LED 5 mm red × 3, Resistor 220 Ω × 3, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Intermediate
- Time
- About 80 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Tell which side a clap came from.
Parts list
- Development Boards
- Sensors
- SemiconductorsLED 5 mm red × 3
- PassivesResistor 220 Ω × 3
- Prototyping
- Prototyping
How to build it
- Read both microphones as fast as possible
- Time the moment each crosses a threshold
- Compare the two times
- Light the left, centre or right LED
- Test at different distances
Common questions
What parts do I need for the clap direction finder?
Arduino Nano, MAX4466 microphone module × 2, LED 5 mm red × 3, Resistor 220 Ω × 3, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the clap direction finder take to build?
About 80 minutes for a intermediate maker.
