Idea
In short
How do you build a rod tip bite alarm?
An MPU6050 clipped to the tip of a fishing rod senses the sudden movement of a bite and sounds a buzzer and lights an LED, ignoring slow swaying in the wind. Keep the electronics dry in a small box and well away from power lines. You need Arduino Nano, MPU6050 IMU, Passive buzzer, LED 5 mm red, Resistor 220 Ω, Tactile push button 6 mm and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 130 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Hear a bite without watching the rod.
Parts list
- Development Boards
- Sensors
- Motors & Actuators
- Semiconductors
- Passives
- Switches
- Prototyping
How to build it
- Fix the sensor to the rod tip
- Read the movement
- Ignore slow changes
- Sound the buzzer on a sharp tug
- Silence with the button
Common questions
What parts do I need for the rod tip bite alarm?
Arduino Nano, MPU6050 IMU, Passive buzzer, LED 5 mm red, Resistor 220 Ω, Tactile push button 6 mm and Breadboard 830 Tie Points.
How long does the rod tip bite alarm take to build?
About 130 minutes for a intermediate maker.
