Idea
In short
How do you build a static charge detector?
A foil plate on a Nano input with a large resistor shows when a charged comb, balloon or sleeve is brought near, and the number on the screen jumps. A safe, harmless way to see static electricity. Keep it away from anything plugged into the mains. You need Arduino Nano, Resistor 100 kΩ, LED 5 mm red, Resistor 220 Ω, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Intermediate
- Time
- About 50 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
See static electricity with a Nano.
Parts list
- Development Boards
- Passives
- Semiconductors
- Passives
- Prototyping
- Prototyping
How to build it
- Fix a foil plate to a high-value resistor on an input
- Read the pin many times a second
- Rub a comb and bring it near
- Plot the jump and its decay
- Compare materials
Common questions
What parts do I need for the static charge detector?
Arduino Nano, Resistor 100 kΩ, LED 5 mm red, Resistor 220 Ω, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the static charge detector take to build?
About 50 minutes for a intermediate maker.
