Idea
In short
How do you build a smart insole pressure map?
Force sensors in a shoe insole show how you place weight when walking or running. You need Seeed XIAO ESP32S3, Force sensitive resistor FSR 402 × 4, Resistor 10 kΩ × 4 and Li-Po battery 3.7 V 500 mAh.
- Level
- Advanced
- Time
- About 300 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Read several force sensors and show a live map.
Parts list
- Development Boards
- Sensors
- PassivesResistor 10 kΩ × 4
- Batteries
How to build it
- Place sensors at heel, arch and toes
- Read each as a divider
- Stream values over BLE
- Show a heat map on a phone
- Compare walking and running
Common questions
What parts do I need for the smart insole pressure map?
Seeed XIAO ESP32S3, Force sensitive resistor FSR 402 × 4, Resistor 10 kΩ × 4 and Li-Po battery 3.7 V 500 mAh.
How long does the smart insole pressure map take to build?
About 300 minutes for a advanced maker.
