Projects / Ideas / Toy train station stopper

Toy train station stopper

IntermediateGames & ToysIdeaReviewed
In short

How do you build a toy train station stopper?

A battery toy train stops at a station for ten seconds then continues, using an IR sensor and a motor driver. You need Arduino Nano, IR obstacle avoidance sensor module, L293D motor driver IC, DC motor 130 size (toy motor), Tactile push button 6 mm and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Control a motor by position.

How to build it

  1. Place an IR sensor on the track
  2. Stop the motor when detected
  3. Wait ten seconds
  4. Restart
  5. Add a speed knob

Related projects

Common questions

What parts do I need for the toy train station stopper?

Arduino Nano, IR obstacle avoidance sensor module, L293D motor driver IC, DC motor 130 size (toy motor), Tactile push button 6 mm and Breadboard 830 Tie Points.

How long does the toy train station stopper take to build?

About 210 minutes for a intermediate maker.