Components / Motors and drivers / L293D motor driver IC

L293D motor driver IC

Classic dual H-bridge chip with built-in flyback diodes.

FunctionDual H-bridge
Supply voltage4.5 to 36 V motor
InterfaceEnable and two inputs per motor
Rating600 mA per channel
Motor DriversReviewedMPN L293DUsed in 3 projects
In short

What is the L293D motor driver IC and what is it used for?

Classic dual H-bridge chip with built-in flyback diodes. Makers use it for small robot motors on a breadboard.

How it works

Two H-bridges built from bipolar transistors let current flow through the motor in either direction.

Key specifications

Interface module specValue
FunctionDual H-bridge
Supply voltage4.5 to 36 V motor
InterfaceEnable and two inputs per motor
Rating600 mA per channel
Logic level5 V

Pinout

1Enable 1,2 (PWM for speed)
2Input 1
3Output 1
45 12 13GND and heatsink
6Output 2
7Input 2
8VCC2 motor supply (4.5 to 36 V)
9Enable 3,4
10Input 3
11Output 3
14Output 4
15Input 4
16VCC1 logic 5 V

How to use it

Put a motor between outputs 1 and 2, PWM enable 1,2, and set inputs 1 and 2 opposite for direction (both the same to brake). The D version has built-in clamp diodes. Solder the GND pins to a large copper area to shed heat.

Applications

Alternatives

Buy at

Common questions

What is the L293D motor driver IC used for?

In maker projects: small robot motors on a breadboard.

How does the L293D motor driver IC work?

Two H-bridges built from bipolar transistors let current flow through the motor in either direction.

What voltage does the L293D motor driver IC need?

4.5 to 36 V motor.

How do I connect the L293D motor driver IC to an Arduino or ESP32?

Enable and two inputs per motor. Pins: 1 (Enable 1,2 (PWM for speed)), 2 (Input 1), 3 (Output 1), 4 5 12 13 (GND and heatsink), 6 (Output 2), 7 (Input 2).

What can I use instead of the L293D motor driver IC?

L298N motor driver IC and DRV8833 dual motor driver.