Projects / Ideas / Power transistor fan speed demo

Power transistor fan speed demo

IntermediatePowerIdeaReviewed
In short

How do you build a power transistor fan speed demo?

A power transistor switches a small fan with PWM, and you measure its heat at several duty cycles. You need Arduino Nano, TIP31C NPN power transistor, Rectifier Diode 1N4007, Resistor 1 kΩ, 5 V DC fan 40 mm, Potentiometer 10 kΩ, 5 V 2 A USB adapter and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Learn about switching losses.

Parts list

How to build it

  1. Wire the transistor and fan
  2. Add the diode
  3. Set PWM with the knob
  4. Touch-check the heat
  5. Compare with a MOSFET

Related projects

Common questions

What parts do I need for the power transistor fan speed demo?

Arduino Nano, TIP31C NPN power transistor, Rectifier Diode 1N4007, Resistor 1 kΩ, 5 V DC fan 40 mm, Potentiometer 10 kΩ, 5 V 2 A USB adapter and Breadboard 830 Tie Points.

How long does the power transistor fan speed demo take to build?

About 210 minutes for a intermediate maker.