Projects / Ideas / Time zone travel clock

Time zone travel clock

BeginnerCommunicationIdeaReviewed
In short

How do you build a time zone travel clock?

A clock chip keeps one time and the screen shows the time in three cities at once by adding each place's hour difference, with a button to choose which three. Handy for calling family far away, and a good lesson in time zones and the 24 hour clock. You need Arduino Nano, DS3231 RTC module, SSD1306 OLED Display, Tactile push button 6 mm, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

Level
Beginner
Time
About 90 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Show the time in three places at once.

How to build it

  1. Keep the clock chip on one standard time
  2. Store each city's hour and half-hour offset
  3. Add the offset and wrap past midnight
  4. Show three cities with the day change marked
  5. Choose the cities with a button

Related projects

Common questions

What parts do I need for the time zone travel clock?

Arduino Nano, DS3231 RTC module, SSD1306 OLED Display, Tactile push button 6 mm, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

How long does the time zone travel clock take to build?

About 90 minutes for a beginner maker.