Idea
In short
How do you build a two-Nano radio range test?
Two boards with radio modules send numbered messages, and a display shows how far the link works. Use the right frequency and an antenna, and follow local radio rules. You need Arduino Nano × 2, SX1276 LoRa Module × 2, SSD1306 OLED Display, Tactile push button 6 mm and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 330 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Test a radio link.
Parts list
- Development BoardsArduino Nano × 2
- Wireless
- Displays
- Switches
- Prototyping
How to build it
- Check the legal band
- Wire both modules
- Send a counter
- Show the signal strength
- Walk and log the range
Common questions
What parts do I need for the two-Nano radio range test?
Arduino Nano × 2, SX1276 LoRa Module × 2, SSD1306 OLED Display, Tactile push button 6 mm and Breadboard 830 Tie Points.
How long does the two-Nano radio range test take to build?
About 330 minutes for a intermediate maker.
