Projects / Ideas / Bingo number caller

Bingo number caller

BeginnerCommunicationIdeaReviewed
In short

How do you build a bingo number caller?

Press a button and the display shows the next bingo number from 1 to 75, with a short beep, and never repeats a number until the game is reset. A handy helper for a family game, and a way to learn about shuffling a list of numbers fairly. You need Arduino Nano, TM1637 4-digit display, Tactile push button 6 mm × 2, Passive buzzer, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

Level
Beginner
Time
About 70 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Call bingo numbers without repeats.

How to build it

  1. Shuffle the numbers 1 to 75 once
  2. Show the next number on each press
  3. Beep for each call
  4. Keep the last few numbers
  5. Reset the game with a second button

Related projects

Common questions

What parts do I need for the bingo number caller?

Arduino Nano, TM1637 4-digit display, Tactile push button 6 mm × 2, Passive buzzer, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

How long does the bingo number caller take to build?

About 70 minutes for a beginner maker.