Idea
In short
How do you build an electricity from a candle (Peltier as generator)?
A Peltier module between a candle-heated plate and a cold heatsink makes enough power to light LEDs through a boost converter. You need MT3608 Boost Module, LED 5 mm white × 2, Digital multimeter, Heatsink TO-220 and Thermal paste.
- Level
- Intermediate
- Time
- About 120 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
See the Seebeck effect and boost a very low voltage.
Parts list
- PowerUse a low-start boost board if you have one
- OptoelectronicsLED 5 mm white × 2
- Tools & Instruments
- Tools & Instruments
- Tools & Instruments
How to build it
- Clamp a Peltier between an aluminium plate and a large heatsink
- Heat the plate with a candle
- Measure open voltage as the temperature difference grows
- Boost to light LEDs
- Keep the hot side below the module's rating
Common questions
What parts do I need for the electricity from a candle (Peltier as generator)?
MT3608 Boost Module, LED 5 mm white × 2, Digital multimeter, Heatsink TO-220 and Thermal paste. MT3608 Boost Module: Use a low-start boost board if you have one.
How long does the electricity from a candle (Peltier as generator) take to build?
About 120 minutes for a intermediate maker.
