Idea
In short
How do you build a two-wheel robot base?
A small two-motor base driven by a modern motor driver, ready for line following and later balancing. You need Arduino Uno R3, TB6612FNG Motor Driver, TT gear motor 3 to 6 V × 2, 9 V battery and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 270 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build a driven robot base.
Parts list
- Development Boards
- Motor Drivers
- Motors & Actuators
- Batteries
- Prototyping
How to build it
- Wire the driver
- Drive each wheel
- Set speed with PWM
- Drive in a square
- Add a stop button
Common questions
What parts do I need for the two-wheel robot base?
Arduino Uno R3, TB6612FNG Motor Driver, TT gear motor 3 to 6 V × 2, 9 V battery and Breadboard 830 Tie Points.
How long does the two-wheel robot base take to build?
About 270 minutes for a intermediate maker.
