Idea
In short
How do you build a two-motor scout cart?
A motor driver and two gear motors drive a simple cart that follows lines drawn on the floor. You need Arduino Uno R3, L298N Dual H-Bridge Module, TT gear motor 3 to 6 V × 2, 9 V battery and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 300 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Drive a cart with two motors.
Parts list
- Development Boards
- Motor Drivers
- Motors & Actuators
- Batteries
- Prototyping
How to build it
- Wire the driver and motors
- Test each wheel direction
- Set speed with PWM
- Turn by speeding one side
- Stop on command
Common questions
What parts do I need for the two-motor scout cart?
Arduino Uno R3, L298N Dual H-Bridge Module, TT gear motor 3 to 6 V × 2, 9 V battery and Breadboard 830 Tie Points.
How long does the two-motor scout cart take to build?
About 300 minutes for a intermediate maker.
