Projects / Ideas / Appliance energy logger

Appliance energy logger

IntermediateHome LabIdeaReviewed
In short

How do you build an appliance energy logger?

A PZEM module measures an appliance's power and energy and logs it. The mains side is wired inside an approved enclosure by a qualified electrician. You need ESP32 DevKit V1, PZEM-004T energy meter module, MicroSD Card Module, DS3231 RTC module and Waterproof enclosure IP65 (junction box).

Level
Intermediate
Time
About 150 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Read an energy meter module over serial and log the data.

How to build it

  1. Wire the logger side to the module's serial port
  2. Have the mains connection made by a qualified electrician
  3. Read watts, volts and kilowatt-hours
  4. Log every minute
  5. Compare with your electricity bill

Related projects

Common questions

What parts do I need for the appliance energy logger?

ESP32 DevKit V1, PZEM-004T energy meter module, MicroSD Card Module, DS3231 RTC module and Waterproof enclosure IP65 (junction box).

How long does the appliance energy logger take to build?

About 150 minutes for a intermediate maker.