Idea
In short
How do you build a lead screw lift platform?
A stepper turns a lead screw to raise a small platform to measured heights. You need Arduino Nano, Geared stepper motor with lead screw, A4988 stepper driver, Limit switch (micro switch with lever) × 2, Tactile push button 6 mm × 2, 12 V 2 A DC adapter and Breadboard 830 Tie Points.
- Level
- Advanced
- Time
- About 330 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Convert rotation to precise linear movement.
Parts list
- Development Boards
- Motors & Actuators
- Motor Drivers
- Switches
- Switches
- Power
- Prototyping
How to build it
- Home to the lower switch
- Move a set distance
- Add the upper limit
- Add up and down buttons
- Calibrate steps per mm
Related projects
Common questions
What parts do I need for the lead screw lift platform?
Arduino Nano, Geared stepper motor with lead screw, A4988 stepper driver, Limit switch (micro switch with lever) × 2, Tactile push button 6 mm × 2, 12 V 2 A DC adapter and Breadboard 830 Tie Points.
How long does the lead screw lift platform take to build?
About 330 minutes for a advanced maker.
