Projects / Ideas / 32-LED status panel with I/O expanders

32-LED status panel with I/O expanders

IntermediateDisplaysIdeaReviewed
In short

How do you build a 32-LED status panel with I/O expanders?

Two MCP23017 chips drive a panel of status LEDs from just two Arduino pins. You need Arduino Uno R3, MCP23017 I/O expander module × 2, LED 5 mm green × 8, LED 5 mm red × 8, Resistor 330 Ω × 16 and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 240 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Expand I/O with I2C.

Parts list

How to build it

  1. Set two chip addresses
  2. Configure outputs
  3. Write patterns
  4. Add a bargraph mode
  5. Add a button input on spare pins

Related projects

Common questions

What parts do I need for the 32-LED status panel with I/O expanders?

Arduino Uno R3, MCP23017 I/O expander module × 2, LED 5 mm green × 8, LED 5 mm red × 8, Resistor 330 Ω × 16 and Breadboard 830 Tie Points.

How long does the 32-LED status panel with I/O expanders take to build?

About 240 minutes for a intermediate maker.