Idea
In short
How do you build a craft box with a keypad latch?
A servo latch opens a small craft box when a four-digit code is typed. For a toy box, not for valuables. You need Arduino Nano, 4x4 matrix keypad (membrane), SG90 Micro Servo, Active buzzer 5 V and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 240 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Open a latch with a code.
Parts list
- Development Boards
- Switches
- Motors & Actuators
- Motors & Actuators
- Prototyping
How to build it
- Wire the keypad and servo
- Read a four-digit code
- Compare to the stored code
- Open and close the latch
- Lock out after three misses
Common questions
What parts do I need for the craft box with a keypad latch?
Arduino Nano, 4x4 matrix keypad (membrane), SG90 Micro Servo, Active buzzer 5 V and Breadboard 830 Tie Points.
How long does the craft box with a keypad latch take to build?
About 240 minutes for a beginner maker.
