Projects / Ideas / Servo horn zero alignment

Servo horn zero alignment

BeginnerRoboticsIdeaReviewed
In short

How do you build a servo horn zero alignment?

Centre a servo, fit its horn level, find the true end stops without forcing it and record the safe range for a project. You need Arduino Nano, SG90 Micro Servo, Servo horns and screws kit, Potentiometer 10 kΩ, Breadboard 830 Tie Points and 5 V 2 A USB adapter.

Level
Beginner
Time
About 80 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Fit a servo horn correctly.

Parts list

How to build it

  1. Centre the servo at 90 degrees
  2. Fit the horn level and fix it
  3. Sweep slowly to each end
  4. Stop at the first strain sound
  5. Record the safe angle range

Related projects

Common questions

What parts do I need for the servo horn zero alignment?

Arduino Nano, SG90 Micro Servo, Servo horns and screws kit, Potentiometer 10 kΩ, Breadboard 830 Tie Points and 5 V 2 A USB adapter.

How long does the servo horn zero alignment take to build?

About 80 minutes for a beginner maker.