Projects / Ideas / Diode drop comparison

Diode drop comparison

BeginnerLearningIdeaReviewed
In short

How do you build a diode drop comparison?

Measure the voltage drop of silicon and Schottky diodes at several currents and see why Schottky diodes save power. You need Schottky Diode 1N5819, Signal Diode 1N4148, Rectifier Diode 1N4007, Potentiometer 10 kΩ, Resistor 220 Ω, Resistor 1 kΩ, 9 V battery, 9 V battery snap with DC jack, Digital multimeter and Breadboard 830 Tie Points.

Level
Beginner
Time
About 150 min
Parts
10
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Compare diode voltage drops.

How to build it

  1. Build a variable current source
  2. Measure each diode at a few currents
  3. Record the drop
  4. Plot the curves
  5. Pick the right diode for a task

Related projects

Common questions

What parts do I need for the diode drop comparison?

Schottky Diode 1N5819, Signal Diode 1N4148, Rectifier Diode 1N4007, Potentiometer 10 kΩ, Resistor 220 Ω, Resistor 1 kΩ, 9 V battery, 9 V battery snap with DC jack, Digital multimeter and Breadboard 830 Tie Points.

How long does the diode drop comparison take to build?

About 150 minutes for a beginner maker.